AC aquastream XT USB 12V Pumpe

Varekort AC aquastream XT USB 12V Pumpe - Ultra

Varenavn	AC aquastream XT USB 12V Pumpe - Ultra
	Ikke på lager.

Varenummer

3508

AquaComputers nye aquastream pumpe!
Avanceret elektronisk styring og overvågning samt forbedret ydeevne - max. løftehøjde på 4,2m! Super støjsvag og stabil pumpe.

- Løftehøjde: op til 4,2m
- Volt: 12v DC
- Strømforbrug: ca. 5w
- Alm 4-pin Molex stik
- Fuldkeramiske lejer
- Mål: (LxBxH) 112x55x72 mm
- Vægt: ca. 500g
- Inklusiv:
Manual
Montagefod
Ledning til RPM aflæsning eller aquabus tilslutning
USB kabel
ATX stik til udluftning

Den nye generation Aquastream der fås i tre udgaver, har alle forbedret ydelse og en række avancerede features:

- Automatisk frekvenstilpasning
- Aquabus interface
- Manuel frekvenstilpasning
- Udluftningsmodus
- Omdrejningsovervågning
- Justerbart RPM signal

Ultra udgaven har følgende ekstra features:
- Manuel justerbar blæserudgang
- Måling af volt på blæserudgang
- Ekstern temperatursensor
- Intern vandtemperatursensor
- Frit justerbar ydelsekurve
- Temperaturstyret blæserudgang
- Mulighed for tilslutning af flowsensor

Link til producent:
AquaComputer

Producentens beskrivelse:
The fourth generation: aquastream XT
In comparison with the predecessor models the functional range was increased considerably. All variants of the aquastream XT have an USB interface through which a monitoring and control is possible, also without a connection to an aquaero. The pump can be controlled with our aquasuite software. Depending on the activated software version of the pump a fan connector, temperature sensors, as well as a connection for a flow sensor is possible. In the ultra version all important monitoring functions and controlling rules are already integrated into the pump.

A rotation detection as well as automatic determination of the maximum frequency are part of the new functions so that a reliable business is guaranteed also at a maximum pumping power. The complete electronics is put in the case without it having got bigger.

The pump in detail: The highest performance with smart electronics:
Furthermore the mechanics of the pump is based on the approved Eheim technology whose engine smoothness is unequalled till now. Compared with the predecessor models the maximum delivery height was increased to sensational 4.2m. The aquastream XT is one of the most efficient pumps on the market and works almost soundless. This was achieved by a highly intelligent drive with complex algorithms and sensors. Rotorposition, current consumption, performance and voltage are determined about 1000 times per second. Out of this an optimal drive is calculated. Depending on system the pump can internally work with up to 6000 rpm.
The pump frequency is found by the pump automatically or can be put manually by software. The pump recognizes independently the optimal operating point.

Moreover, the data are passed on by USB or aquabus and can be evaluated and represented in the aquasuite software. Parallel to that a speedo signal can be passed on to the mainboard which can trigger a switching off of the computer at faults of the pump. Furthermore the pump has the deaeration mode of course which is freely configurable this time.

The sensors of the aquastream XT: Including water temperature:
The measuring of the water temperature was integrated too. This measuring can be also used for the control by the aquaero through aquabus. Furthermore internally more temperatures of the output stages are determined. The pump has intelligent protective functions: If the temperature increases about the preprogrammed protection values, then the electronics is put into a safety mode to avoid damages. Another external temperature sensor and a flow sensor can further be attached directly at the pump. Both are evaluated at extremely high precision and can be embedded in the alarm scheme. Unbelievably many alarm thresholds and parameters are freely configurable.

The integrated complex PID regulator works unnoticedly in the microprocessor and has only one aim: cooling the computer on the desired temperature and operating the fans as quietly as only somehow possible. This is calculated with a mathematical regulator model. It measures and calculates the optimal seetings for the fan about 1000 times per second. Of course without grumbling PWM a very exact analogous output voltage is provided. Necessary starting speeds of your fans are also taken into account and executed by the regulator automatically.

Pris ved	1	stk.		698,00 DKK

«-Tilbage

Vis uden moms Anbefal vare Print

Hvis du har nogle spørgsmål er du velkommen til at kontakte os.

Relaterede varer

AC Flow sensor high flow G1/4
Til måling af flow i vandkølingssystem - ny high-flow model!
Passer bl.a. til AC Aquaero, aquastream XT Ultra og poweradjust

295,00 DKK

AC Temperatursensor intern-extern G1/4
Til måling af vandtemperatur. Unik "inline" model med 1/4" gevind både indvendigt og udvendigt! Kan monteres direkte på fx radiator eller kølehoved.

69,00 DKK

AC aquainlet Eheim Res - black alu
Super flot aluminium reservoir
Passer bl.a. Eheim 1046, 1048, Watercool Eheim 12v, Innovatek HPPS og AquaComputer aquastream

~~279,00 DKK~~
232,50 DKK

AC aquainlet Eheim Res - blue alu
Super flot aluminium reservoir
Passer bl.a. Eheim 1046, 1048, Watercool Eheim 12v, Innovatek HPPS og AquaComputer aquastream

~~279,00 DKK~~
232,50 DKK

Adapter 1046 type - Udgang
Adapter til udgangen på AC aquastream, Innovatek HPPS og Eheim 1046
Omformer til 1/4" gevind - giver mulighed for montering af alle typer studser

29,00 DKK

Adapter 1046/1048 type - Indsug
Adapter til indsugningen på AC aquastream, Innovatek HPPS og Eheim 1046/1048
Omformer til 1/4" gevind - giver mulighed for montering af alle typer studser

39,00 DKK

Kunder købte også